Vật liệu giày dép nhân tạo sinh thái thoáng khí bằng da microfiber PU, da giày tổng hợp cho vật liệu mũ giày công sở thoải mái

Mô tả Sản phẩm Sợi quang an toàn: Chống thấm nước & thoát hơi (en ISO 20344 S2)
Hiệu năng được chứng nhận (ISO 20344:2021): Khả năng thấm hơi nước ≥0.8 mg/(cm²·h)
Hệ số hơi nước ≥15 mg/cm²
Độ thâm nhập của nước: ≤0.2 g
Hấp thụ nước: ≤30%
Tính năng: Thân thiện với môi trường (sợi tái chế) | đổi mới công nghệ

Số hiệu mẫu	SMF-LB01
Chiều rộng	137MM
trọng lượng	100-1000 g/m2
Gói vận chuyển	Lăn tròn
Thương hiệu	AN /Tùy CHỈNH
Kỹ thuật	Công nghệ xử lý khô
Xuất xứ	Trung Quốc
Mã HS	5603941000
Mẫu hình	Tùy chỉnh
Sử dụng	giày an toàn
Độ dày	1.2/1.4/1.6/1.8/2.0mm
Màu sắc	Tùy chỉnh
Thời gian giao hàng	14 ngày
Bố cục	Ni lông +pu
Chi tiết đóng gói	30-50 mét/cuộn trong bao đựng có túi chống thấm nước, Bên ngoài được đóng gói cùng với tùy chỉnh túi chống mài mòn
tính năng	Độ thoát khí, chống mài mòn và chống thấm nước

Quy trình sản xuấtFrom Raw Materials to Finished GoodsRaw Materials: Polyester (Non-woven), Nylon & Polyethylene (Microfiber), Color Master Batch.
Production Process: Mixing → Spinning → Needle Punching → Pressing → Wet Process → Oiling → Softening → Dry Process.
Final Outputs: Nubuck, PU Coated Non-woven Knit backer, Microfiber Suede, PU Coated MicrofiberBố trí chuỗi cung ứngAnAn China HQ & Full Supply Chain CoverageAnAn Vietnam (Branch 1)AnAn Indonesia (Branch 2)Zhangzhou, Fujian | 228,126m2 | 1,400+ staff
Lines: 5 Microfiber, 4 Wet, 9 Dry
Raw Materials: 30K T/Y TPU, 50K T/Y Resin, 18K T/Y Fiber
Substrates: 38,800,000 Yards/Y Wet, 30M Yards/Y Microfiber
Finished Goods: 32,400,000 Yards/Y DryLocated in Dat Do Industrial Park, HCMC. 67,800m2 area, 400+ employees.
Capacity: 10,800,000 M Yards/Yr current | 25,200,000 M Yards/Yr planned.
Lines: 3 existing & 7 planned dry-processing lines. Full in-house PU processing and Test Lab.Located in Karawang, Indonesia. 32,000m2 area, 200+ employees.
Current Capacity: 7,200,000 Yards/Yr.
Lines: 2 dry-processing lines | Planned: 2 TPU casting film lines & 1 polypropylene paper line. In-house PU processing and Test Lab.Trung tâm R&D AranProfessional Quality Control SystemSATRA-Accredited Labs (China & Vietnam) 70+ Tests for 30+ Brands. Advanced equipment for physical properties & chemical safety: Tensile, Martindale Abrasion, GC-MS, Constant Temp/Humidity Lab.Nhà máy không chứa cacbonThe Industry's First Certified Zero-Carbon FactoryCertified by TÜV Rheinland. Meeting the highest standards in carbon management and energy efficiency.Bố cục toàn cụcCÂU HỎI THƯỜNG GẶPQ1: When was AnAn founded? Registered capital & employees?
AnAn was founded in 2008. Our registered capital is RMB 315 million. We have 1,239 employees and our own factory area covers 117,000 square meters.
 
Q2: What certifications do you hold?
We hold ISO 9001 (quality), ISO 14001 (environment), ISO 45001 (occupational health & safety), and ISO 50001 (energy management), plus IATF 16949, GRS, SATRA, and ISCC certifications, and REACH Certificated.
 
Q3: What is your production capacity & lead time?
We have production bases in China, Vietnam, and Indonesia. In China alone, annual dry-processing capacity exceeds 100 million yards, with monthly shipments reaching 3 million yards. Lead time: 7-10 days for stock orders, 15-20 days for custom orders. MOQ starts from 300 meters.
 
Q4: How do you ensure quality consistency?
We operate SATRA-accredited laboratories in both China and Vietnam. Every batch is tested for physical properties, including abrasion resistance, tensile strength, hydrolysis aging, etc., as well as chemical safety complying with REACH/RoHS standards.
 
Q5: Any overseas factories? How global supply?
Yes, we have production facilities in Vietnam and Indonesia. With multi-base coordination and overseas warehouse reserves.
 
Q6: Which brands do you work with? Repurchase rate?
Sports & outdoor:  ANTA, DESCENTE,  KOLON SPORT, GIRO.
Some international brands cannot be displayed due to licensing issues. 
Our long-term customer repurchase rate is stable between 80% and 100%, with many clients cooperating for over 10 years.
 
Q7: What customization options?
We offer full OEM/ODM customization: color matching (Pantone or customer sample), thickness from 0.3 to 2.4 mm, surface textures (smooth, fine grain, medium grain, coarse grain, glossy, suede-like), various backing fabrics, standard width of 54 inches or custom, and finishing processes including printing, embossing, water repellent treatment, and more.
 
Q8: How to verify factory authenticity?
You are welcome to arrange a live video tour via WeChat, Zoom, or Teams, or visit our physical factories in China, Vietnam, or Indonesia. We also provide free samples and third-party test reports. All qualification documents can be verified remotely.