Nhà máy chế biến quặng đồng Máy tuyển nổi

Copper Ore Processing Plant-Flotation Machine Flotation Machine is widely used in non-ferrous metal, ferrous metal and so on rough sizing, selection and counter-flotationwork

Flotation machine Applications: Mining flotation mahine is widely used for roughing, concentrating and reverse flotation of nonferrous metals that include copper, lead, zinc, nickel and molybdenum, ferrous metal and nonmetallic minerals.


Copper Flotation Working Principle:
1. After intensively mixed, the pulp and medicaments are fed to the groove bottom of the first tank.
2. When the impeller of the flotation machine begins to rotate, negative pressure is formed, making the air and pulps at the bottom and middle part of the tank enter the mixing zone. The pulp, air and medicaments are then mixed in the mixing zone.
3. As a result of the centrifugal force, the blended pulps are lead to the mineralization area. The air is in full contact with the coal particle and forms mineralized bubbles which are then equally distributed to groove wall and removed upward to the separation region. These bubbles then gather as a foam layer and are discharged by the scraping tool. Finally, clean coal foam is produced by this flotation machine.
4. Coal particles that are not mineralized will be remixed, re-mineralized and re-separate through the recycle hole and the upper intake.
5. The left pulp that are not sucked by the impeller enters into the third tank after going through the process of first tank Thus, flotation machine runs in cycle and discharges ore pulp through the tailing box of the floatation machine.


Technical Parameter of the copper flotation machine :
SF series:

Model		SF0.37	SF0.7	SF1.2	SF2.8	SF4
Trough capacity(m³)		0.37	0.7	1.2	2.8	4
Blade diameter(mm)		300	350	450	550	650
Production capacity(m³/min)		0.2-0.4	0.3-0.9	0.6-1.2	1.5-3.5	0.5-4
Blade rotation speed (m³/min)		352	400	312	268	238
Motor	Model	Y90L-4	Y100L2-4	Y132M2-6	Y160L-6	Y180L-6
		Y90S-4	Y90S-4	Y90S-4	Y90S-4	Y90L-4
	Power(kw)	1.5	3	5.5	11	15
		1.1	1.1	1.1	1.1	1.5
Dimensions(mm)		700*700 *750	900*820 *950	1100*1100 *1100	1700*1600 *1150	1850*2050 *1200
Single trough weight (kg)		468	600	1373	2338	2660

XJK series :

Model	XJK-0.35 (3A)	XJK-0.62 (4A)	XJK-1.1 (5A)	XJK-2.8 (6A)	XJK-5.8 (7A)
Volumem3	0.35	0.62	1.1	2.8	5.8
Capacitym3/min	-0.4	0.3-0.9	0.6-1.6	1.5-3.5	3-7
Rotation speedr/min	470	400	330	280	240
Impeller diametermm	300	350	500	600	750
Motor Rotor, Scraping plate, Power, Blade motorkw	Y90L-4	Y100L2-4	Y132M2-6	Y160L-6	Y200L2-6 (255M-6)
	Y90S-4	Y90S-4	Y90S-4	Y90S-4	Y90L-4
	1.5	3	5.5	11	22(30)
	1.1	1.1	1.1	1.1	1.5
Weightt/single trough	0.43	0.86	1.38	2.33	3.533

Mining Flotation Machine Features:
1. Large air-absorption capacity
2. Low energy consumption
3. Every cell owns three functions: Air absorption, slurry absorption, and floatation separation, and the cells form a floatation separation loop by itself without any auxiliary equipment, and is allocated horizontally, which favors the change of flow.
4. The circulation of mineral slurry is reasonable, and can avoid the disposition of coarse sand to the largest extent.
5. There is self-control device on the surface of mineral slurry, so it is easy to adjust it.
6. The impeller has backward-inclined upper and lower vanes, which produce upper and lower circulation of mineral slurrry respectively.


Copper flotation site successfully site :


Hengxing equipment can provide turkey service for customers, such as engineering consultation, engineering design, equipment manufacturing, packing & transportation, installation & commissioning personnel training etc.

About Spare Parts
Hengxing equipment will be dedicated to provide our customers with genuine spare parts with high quality. With our technological advice, the life cycle of your machine can be prolonged and sustained significantly with high effectiveness.

About Training
Hengxing equipemnt could offer excellent facilities and comfortable environment and training services to different customers. The training should include product training, safety training, operation training, maintenance know-how, technical know-how training, and regulations training, etc. All of the training is customized to fulfill every customer's expectations. Training programs can be conducted in our workshop, or at customer's site.

About Installation and Commissioning
Hengxing equipment are able to guide the overall installation of whole set production line, including crushing production line and cement equipment production line, etc., which will allow you to start the normal operation of equipment immediately. After installation,we will make inspection of the whole machine commissioning and operation condition and provide you testing data report of installation.


FAQ:
How do you do QA?
A:We have special team do strict QA,this is our strengths:
(1)Every gear box will be tested for 8 hours with oil inside to guarantee there is no leak.
(2)Every shaft will be inspected for the centering jumpiness.
(3)Every roller will be checked to make sure its in the range of tolerance critical parts will be inspected for all dimensions.

What we offer?
We are developing heavy industrial machines and allowing mining companies to implement efficient and more effective ways of mining through our goods. We have variety of products available for sale. These products include Stone Crushers, Jaw Crushers, Cone Crushers, Hammer Crushers, and Sand making Machines, Sand Washing machines, Rod Mills, ball mill,, Ore Dressing Machines,rotary dryer,rotary kiln,coal briquette machine . Development of these machines had never been an easy task. Sand making equipments are offered by Hengxing Equipment with very nominal prices. The research facility of our industry enables our engineers to serve international market with new theories and develop a perfect solution for the mining world. Our Products have a great demand in all over the world. for more information ,please visit : zzhxpsj.en.made-in-china.com





Contact us :
Sara
Mobile phone ): 0086 137 8347 1727