Nêm Cân Bằng Gạch Tái Sử Dụng Cho Ốp Lát Tường Sàn

SPECIFICATIONS

Brand Name: XMSJ

Certification: None

Choice: yes

Hign-concerned Chemical: None

Model Number: 326pcs

Origin: Mainland China

semi_Choice: yes

Note: Please carefully examine the quantity combination of the images.

• 25 X Tile Levelers  +   300 X Leveling Cross + 1  X  Wrench

Specification:

• Material: Pp + 430 Stainless Steel

• Suitable Spacer: 2mm-8mm/0.08-0.31in

• With 3 Packs Of Tile Leveling Crosses Of Different Specifications, It Is Suitable For More Different Occasions:

• Leveling Cross: Specification 1.0mm/0.04in, Thickness 2.5mm/0.1in, Length 22mm/0.87in, Scope Of Application: Seamless Tiles, Polished Tiles

• Leveling Cross: Specification 2.0mm/0.08in, Thickness 2.5mm/0.1in, Length 22mm/0.87in, Scope Of Application: Wall Tiles, Tiles

• Leveling Cross: Specification 3.0mm/0.12in, Thickness 2.5mm/0.1in, Length 23mm/0.91in, Scope Of Application: Antique Bricks, Outdoor Bricks

Feature:

• Wear-resistant, Reusable.

• Easy To Use For Diy Operation.

• Keep The Tile Balance On The Same Horizontal Position.

• Improve Tile Installation Speed.

• Reduce Installer Fatigue/stress.

• Virtually Lippage Free, Flat Surface Drastically.

• Reduces The Need For Grinding And Polishing.

• Prevents Tiles From Moving While Curing.

Using Tip:

• Paving The First Tile, Leaving An Appropriate Distance (Use With Cross Spacer). Close To The Tiles.

• Insert T-shaped Needle Along The Gap In The Tile.

• Then 180 Degree Rotation,t-shaped Needle Stuck At The Bottom Of The Two Tiles.

• Adjust The Caps With Your Hand/special Wrench Until The Two Tiles Are On The Same Level.

• About 4-6 Hours After Leveling, Before Cement/adhesive Is Completely Dry, Rotate Caps In The Reverse Direction, Remove 180° T-needle Until The Word, Take Out.

"326pcs:

• 25 X Tile Levelers

• 1 X Wrench

• 100 X 1mm Leveling Cross (1 Pack)

• 100 X 2mm Leveling Cross (1 Pack)

• 100 X 3mm Leveling Cross (1 Pack)"