Mô-đun Trạng Thái Rắn Ba Pha AC/AC 60A SSR

Introduction:
Solid state relay (SSR) is an electronic switching device that switches states when an external voltage is applied along its n-type and p-type junctions. SSR has a small control signal that controls a larger load current or voltage. It consists of a sensor which responds to an appropriate input (control signal), a solid-state electronic switching device which switches power to the load circuitry, and some coupling mechanism to enable the control signal to activate this switch without mechanical parts. The relay may be designed to switch either AC or DC to the load. It serves the same function as an electromechanical relay, but has no moving parts.

Three phase AC to AC Solid State Module(SSR)

Features:
* Dielectric strength up to 4000V
* Photo isolation
* Zero cross or random turn-on
* Panel mount
* AC control
* Built-in RC
* LED indicator

1) Specification(Rated current corresponding to Resistive load):

Model	SYTH6048ZA2
Load current	60A
Load voltage	480VAC
Control voltage	70-280VAC
Control current	AC 12mA
On state voltage drop	≤1.8VAC
On state leakage current	≤10mA
Off state time	≤10mS
Dielectric strength	2500VAC
Insulation resistance	1000MΩ500VDC
Ambient temperature	-30°c ~ 75°c
Mounting method	bolting
Indicator	LED
Weight	380g

2) Dimension & wring:

4) Matched heatsink & fan:
Heatsink H-150