Máy sấy quay chuyên nghiệp cho cát silica

Silica Sand Rotary Dryer:
Silica Sand Rotary Dryer, yellow sand dryer is a drier used for handling a large number of materials. As for the operation reliability, operating flexibility, strong adaptability, handling large, Silica Sand Rotary Dryer is widely used in building materials, metallurgy, food, chemical, coal, medicine and mining industries. Silica Sand Rotary Dryer or yellow sand dryer belongs to rotary drum dryer.

Silica Sand dryer is generally used for granular materials, can also be used for drying the mixed materials, sick-like paste materials and the high moisture content materials. Especially for drying sand, Tai Da sand dryer has excellent effects. Sand dryer or yellow sand dryer has the advantage of large production capacity wide Suitable range, small flow resistance, the operation allowed large fluctuation range, easy to operate and so on.


A. Silica Sand Rotary Dryer structure:
1) Cylinder;
2) Pre-roll ring;
3) After-roll ring;
4) Gear;
5) Roller block;
6) Drag roller;
7) The small gear;
8) Discharging part;
9) Jan Plate;
10) Deceleration machine;
11) Motor;
12) Sirocco Road;
13) Feed chute;
14) Furnace body and other components.


Besides other matching device also can be designed according to user's request, such as: Coal gasifier, firebox or auxiliary hoist, belt conveyor, quantitative feeder, cyclone dust catcher, induced draft fan and so on.

B. Silica Sand Rotary Dryer Working principle:
Sand is sent by the belt conveyor or bucket elevator to the hopper, and then the feeding machine feeds the materials to the materials end by the feeding pipe, the inclination of the feeding pipe should be larger than natural inclination of materials.

In order to the materials can flow to the sand dryer smoothly. Dryer cylinder is a rotating cylinder which is slightly tilted compared to the horizon. Materials were added from the lightly high end, and the heat-carrying materials were added from the low-end to enter into a counter-current contact with the materials, but there also has that heat-carrying materials and the material are putted together into the barrel.

Along with the rotating cylinder, materials were moved to the lowest end effected by the gravity. Wet material get the heat from the heat-carrying materials directly or indirectly, during the moving processing in barrel, so as to the wet materials can get dry, then were submitted by the belt machine or screw convey at the discharge side.

In the Silica Sand Rotary Dryer cylinder's inwall, there has a stiring plate, whose function is that stir the materials up and down, so that the touching surface between the raw material and airflow get large to improve the drying rate and to promote the material progress.

Heat-carrying materials are generally divided into hot air, flue gas and so on. After the heat-carrying materials getting through the dryer, normally it needs to takes cyclone trap the Material inside the gas. For further reduction dustiness in the exhaust gas, the materials should get through the bag dust catcher and wet-type catcher, and then get released.

Specifications(m)	Capacity(t/h)	Main motor		Main gear box		Weight(t)
		Power(kw)	Model	Model	Speed reduction ratio
ø 1.2*10	2.5	7.5	Y160M-R3	ZL50-16-I	-----	13.5
ø 1.5*12	3.3-4.9	10	Y160L-6-B3	JZQ500-III-2F	-----	18.9
ø 1.5*15	4-6	18.5	Y200L1-6	JZQ500-III-2F	-----	21
ø 1.8*12	4-6	18.5	Y160L-6	ZQ50-16II-2	16.46	22.83
ø 2.2*12	7-12	18.5	Y200L7-6	JZQ650-III	31.5	37.6
ø 2.2*14	7-12	22	Y200L7-6	JZQ650-III	31.5	40
ø 2.2*16	12	30	Y225M-6	JZQ750-III	31.5	45
ø 2.4*14	12	30	Y250M-6	JZQ750-III	31.5	51
ø 2.4*18	10-13	37	Y250M-6	ZL85-13-I	27.16	54
ø 2.4*20	10-14	37	Y250N-6	ZL85-13-I	27.16	54.14
ø 3*20	25	55	Y250M-4	ZL100-16-I	41.52	78
ø 3*25	32-36	75	YR280M-4	ZL100-16-I	41.52	104.9