Máy sản xuất gạch bê tông khí chưng áp (STM4.2)

AAC block machine supplied by HengXing company had gain great popularity all over the world! Get the chance! Make the deal!

Autoclaved Aerated Concrete Block advantages:
1. Large variety of sizes: AAC can be produced in a large variety of sizes, from standard blocks to Large reinforced panels;
2. Excellent thermal insulation: AAC has a very low thermal conductivity and therefore a very high Thermal energy efficiency is achieved. This results in savings on heating and cooling costs;
3. Extreme lightweight: AAC weighs approximately 50% less than other comparable building products;

4. High compressive strength: AAC is a solid product, therefore making it highly load bearing. The entire surface area is used in structural calculations;
5. High dimensional accuracy: As a result of its dimensional accuracy, AAC is extremely easy to install, As no thick set mortar is required;
6. Great acoustic insulation: The porous structure of AAC provides a high acoustic insulation;
7. High fire resistance: AAC has an extremely high fire rating of at least 4 hours and more;
8. Termite resistance: AAC can not be damaged by termites or insects;
9. High workability: As a result of the excellent size/weight ratio, constructing with AAC is very rapid.
Even though AAC is a solid building material, it can be cut, sawn, drilled, nailed and milled like Wood, making it an extremely workable product.

Parameter Name	Parameter Value
flash	65-70%
cement	6-15%
lime	18-25%
gypsum	3-5%
Aluminum powder paste	8
Water & material rate	0.60-0.65
Casting temperature	36-40° C
Aluminum mixing time	30-40s