Máy làm lạnh kiểu xoắn ốc TCA cho máy ép nhựa

Product Description

TCA Series Spiral Type Air Chillers for Injection Molding Machine

TCA series air chiller has two types : tube-in-shell type and spiral type. This series can be afforded cooling ranges from 5~35ºC, even lower to 3ºC (temperature controlled accuracy at ± 1ºC).It adopts fin style air-cooled condensers with features of rapid heat transmission and excellent heat dispersion. Cooling water no need to be required. The compressors' power ranges from 5HP ~ 36HP and cooling capacities from 12900 ~ 123840 kcal /hr. The chiller can accurately control the mold temperature to shorten the molding cycle, accelerate the product shape, so that the product neither deformation and shrinkage but also can improve the surface perfection, enhance the perspective rate, improve the quality of product.

Specification Sheet

Model		TCA-5	TCA-10	TCA-12	TCA-15	TCA-20	TCA-24	TCA-30	TCA-36
Cooling Capacity	KW/HR	15	30	36	49	61	72	91.8	108
	KCAL/HR	12900	25800	30960	42140	52460	61920	78948	92880
	BTU/HR	51180	102360	122832	167188	208132	245664	313904	368496
Compressor Type	Scroll Type	Scroll Type	Scroll Type	Scroll Type	Scroll Type	Scroll Type	Scroll Type	Scroll Type
Number of Compressors	Set	1	2	1	2	2	2	3	3
Compressor Total Power	HP	3.7	7.5	9	12	15	18	22	27
Refrigerant	R22
Refrigerant Filling Quantities	KG	2.3	4.6	5	9	10	11	15	16
Refrigerant Control Mode	Capillarity Tube	Expansion Valve	Expansion Valve	Expansion Valve	Expansion Valve	Expansion Valve	Expansion Valve	Expansion Valve
Evaporator Type	Straight Tube Array	Straight Tube Array	Straight Tube Array	Straight Tube Array	Straight Tube Array	Straight Tube Array	Straight Tube Array	Straight Tube Array
Water Tank Capacity (Evaporator)	L	80	150	190	290	290	290	450	450
Chilling Water Flow(Evaporator)	L/MIN	110	200	350	350	350	650	650	900
Condenser Type	Fin Style Air-Cooled	Fin Style Air-Cooled	Fin Style Air-Cooled	Fin Style Air-Cooled	Fin Style Air-Cooled	Fin Style Air-Cooled	Fin Style Air-Cooled	Fin Style Air-Cooled
Blower Power ( Condenser)	KW	0.38	1	1.9	2	2	3.8	5.7	5.7
Numberof Blower	PCS	2	2	2	4	4	4	6	6
Single Blower Power	KW	0.19	0.5	0.95	0.5	0.5	0.95	0.95	0.95
Number of Cooling Water lnlet/Outlet	Group	1	1	1	1	1	1	1	1
Cooling Water Inlet/Outlet Size	MM	25	40	50	50	50	50	75	90
Water Tank Capacity	L	80	150	190	290	290	290	450	450
Pump Power	HP	0.75	1.5	2.2	2.2	2.2	3.7	3.7	5.5
Pump Flow	L/MIN	110	200	350	350	350	650	650	900
Pump Maximum Lifts	M	17	16	18	18	18	18	18	18
Power Supply	3P 380VAC, 50Hz
Control Voltage	1P 220VAC, 50HZ
Total Power	KW	4.9	10	12.5	16.2	19.2	24	28.7	38.5
Machine Dimensions	L(MM)	1230	1530	1600	1600	1600	1600	2400	2400
	W(MM)	650	760	860	1400	1400	1480	1400	1480
	H(MM)	1470	1650	1980	2000	2000	2120	2120	2120
Machine Weight	KG	120	380	450	750	800	900	1100	1300

Features

1. To employ high precision temperature controller which can accurately control water temperature 5~35ºC , precision up to ± 1ºC .
2. To employ fin style air-cooled condensers with features of rapid heat transmission and excellent heat dispersion. Cooling water no need to be required.
3. The cooling air of the air chiller is inhaled from the side of the fuselage and the top discharge effectis.
4. To adopt imported superb compressor and water pump, stable performance, power saving, durable service life and low noise.
5. 304 stainless steel insulated water tank with durable service life, easy to clean and maintenance.
6. Complete safety devices including power reverse phase& power short phase and anti-freeze protection.
7. To adopt High efficiency tube-in-shell evaporator and seamless spiral copper tube, long service life, ensure good water quality.
8. Standard equipped with RS485 communication interface that can realize automatic centralized monitoring.
9. The temperature of the ultra-low temperature chiller can reach below -15ºC (option).
10. Chillers for anti-alkaline& anti-acid type can be customize.

Options

1. Large Scale Water Filter
2. Switch for Leakage Protection
3. Water Tank Water Level Meter
4. Voltage Abnormal Protection Switch
5. Ozone -Friendly Refrigerant R407C/R410

Application

Mainly used in mold cooling of the plastic industry, shorten the molding cycle, accelerate the product shape, so as to improve product quality. At the same time, it is also widely used in other industries that need cooling, such as electroplating, food, electronics industry and ultrasonic machinery cooling.

One to One Application


One to Many Application

About Us

Dongguan Tongyi Plastic Machinery Manufacturing Co.,Ltd.(abbr. Tongyi) was found in 2005, Tongyi offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.

Q&A

Q: Are you a manufacturer?
A: Yes, we have seventeen years experience in equipment manufacturing.

Q: Do you support OEM?
A: Yes, we have our own brand, and also support ODM, OEM.

Q: How about your warranty?
A: All of our products for one years warranty.

Q: How about your average lead time?
A: Peak Season Lead Time: within 15 workdays. Off Season Lead Time: within 15 workdays.

Q: What's your payment term?
A: The payment term is 70% prepayment, 30% balance before delivery.