Hitbox May Han MIG Ban Tu Dong Synergy 220V Arc TIG

Item/Model

MIG250

IOInput voltage

AC230V±15%

No-load voltage

64V

Input power

5.9KVA

Welding current rangeMMAA(A)

30～180

Welding current rangeTIG(A)

20～180

Welding voltage range(MIG)(A)

30～160

2T/4T

Yes

MMA functions

Built-in hot start, arc-force, anti-stick and VRD

Wire feed speed range(m/min)

2～14

Rated duty cycle

20%

Overall efficiency

85%

Enclosure class

IP21S

Power factor COSφ

0.72

Insulation class

IEC60974-1 / EN60974-1

Noise(db)

＜70dB

Applicable electrode/wire(mm):

1.6 – 4.0 （(1.6-4.0mm rod) 6013 can be used Very good, also 7018）0.6/0.8/0.9/10

Applicablewire

5kg /1kg

Characteristic

l 4 in 1 180Amp MIG Welder

l Supports Gasless MIG/Gas MAG/MMA/Lift TIG

l Suitable for welding wire diameter: 0.6/0.8/0.9/1.0mm

l Suitable electrode diameter: φ1.6-4.0

l Weld metal: iron, stainless steel, alloy steel

l MIG time: 2T/4T, support long time MIG pull welding

Package content

l 1* MIG250 welder

l 1* MB15 mig torch (3m)

l 1* 200A electrode holder (1.8m)

l 1* 200A ground clamp (1.8m)

l 1*gas tube

l 2* rollers

About mig welding

ü MAG Weld: Connect the ground clamp to the negative terminal.

ü MIG welding - Connect the work clamp to the positive terminal.

ü Supports the useof 0.6/0.8/0.9/1.0mm diameter solid/flux cored wire.

v Note: The MIG function does not display the current, only the wire feed speed (0-14m/min).

About arc welding

ü Connect the ground clamp to the negative terminal

ü Connect the electrode holder to the positive terminal

ü Supports welding rods with diameters from 1.6 to 4.0mm, it is not compatible with cellulose electrodes

v TIPS: Built-in anti-stick, hot start system

About Lift TIG welding

ü Connect the ground clamp tothe positive terminal

ü Connect the WP-17V torch to the negative terminal

ü It is recommended to use tungsten wires with a diameter of 3.2 mm for arc starting.