Giấy chứng nhận máy nghiền bi cho khoáng sản

Grinding Ball Mill For Mineral Application:

Grinding Ball Mill is the key equipment for grinding after the crush process, and it is widely used in the manufacture industries, such as cement, silicate, new building material, refractory material, fertilizer, ferrous metal, nonferrous metal and glass ceramics, it also can be used for the dry and wet grinding for all kinds of ores and other grind-able materials.


Grinding Ball Mill For Mineral Working Principle:
The Grinding Ball Mill is horizontal cylindrical rotation device, driven by brim gearwheel. There are two /three chambers and grid. Material goes into the first chamber through the spiral feeding inlet. Inside the first chamber, there are stage liners and ripple liners as well as steel balls. The shell rotates so as to generate electricity, and this force brings ball to a certain height and then balls drop down by gravity, the impact is the grinding force to the material. After the primary grinding, materials go into the second chamber through segregate screen. In the second chamber, there are flat liners and steel ball. After the secondary grinding, material is discharged from the discharging mouth. Then the whole grinding process is ended.


Grinding Ball Mill For Mineral Structure:

Grinding Ball Mill is composed of feeding part, discharging part, turning part and driving part (reducer, small driving gear, electric motor and electric control). The quill shaft adopts cast steel part and the liner is detachable. The turning gearwheel adopts casting hobbing process and the drum is equipped with wear-resistant liner, which has good wear-resistance. Grinding Ball Mill is with stable and reliable working condition. Moreover, according to different materials and discharging methods, there are dry ball mills and wet ball mills for choice.

Model	shaft rotation speed(r/min)	Ball load(t)	Feeding size(mm)	Discharging size(mm)	Capacity(t/h)	Power(KW)	Weight(T)
Φ 900 × 1800	38	1.5	≤ 20	0.075 -0.89	0.65 -2	18.5	3.6
Φ 900 × 2100	38	1.3-1.4	≤ 15	0.075 -0.83	0.7 -3.5	18.5	3.9
Φ 900 × 3000	38	2.7	≤ 20	0.075 -0.89	1.1-3.5	22	4.5
Φ 1200 × 2400	32	3.8	≤ 25	0.0745-0.6	1.5-4.8	30	11.5
Φ 1200 × 2800	32	3.3-3.5	≤ 25	0.0745-0.6	2-6	30	13
Φ 1200 × 4500	32	7	≤ 25	0.074 -0.4	1.6-5.8	45	13.8
Φ 1500 × 3000	27	8	≤ 25	0.074 -0.4	2-5	75	17
Φ 1500 × 3500	27	6.75 -6.4	≤ 25	0.075 -0.4	3-7	75	17.5
Φ 1500 × 4500	27	14	≤ 25	0.074 -0.4	3.5-12	110	21
Φ 1500 × 5700	27	15	≤ 25	0.074 -0.4	3.5-8	115	24.7
Φ 1830 × 3000	24	18	≤ 25	0.074 -0.4	4-10	130	28
Φ 1800 × 3600	24	10.6 -11.35	≤ 25	0.075 -0.4	5-22	130	33.5
Φ 1830 × 7000	24	25	≤ 25	0.074 -0.4	7.5-17	210	36
Φ 2100 × 3600	22	14-15.2	≤ 25	0.075 -0.4	15-36	370	46.8
Φ 2200 × 5500	21	30	≤ 25	0.074 -0.4	10-20	210	48.5
Φ 2200 × 6500	21	31	≤ 25	0.074 -0.4	14-26	380	52.8
Φ 2200 × 7500	21	33	≤ 25	0.074 -0.4	16-29	380	56
Φ 2400 × 3000	20.6	15.5 -16.6	≤ 25	0.075 -0.4	22-24	245	59
Φ 2400 × 4500	21	30	≤ 25	0.074 -0.4	8.5-60	380	65
Φ 2700 × 3600	20.6	39	≤ 25	0.074 -0.4	12-70	400	91.3
Φ 2700 × 4000	20.7	40	≤ 25	0.074 -0.4	12-80	400	94
Φ 2700 × 4500	20.7	48	≤ 25	0.074 -0.4	12-90	430	102
Φ 3200 × 4500	18	65	≤ 25	0.075 -0.4	according to the technics	800	137

Contact:
Ms Sara Pang
Mobile phone : 0086137 8347 1727