Eco-Friendly Lightweight Thermal Insulation Wall Panels for Warehouses

Product Description

Product Description
The eps sandwich panel uses ordinary portland cement, sand and fly ash or other industrial waste such as water slag, slag, etc. as fine aggregate, and then adds polystyrene particles and a small amount of inorganic chemical additives to cooperate with full automatic high efficiency A special mixing system for forced light aggregates, which introduces air during the mixing process to form a honeycomb-like stable pore in the core layer to further reduce the product bulk density, which not only reduces the material cost, but also achieves the ideal thermal insulation and sound insulation effects. Polystyrene particles and pores are evenly distributed inside the product, so that the concrete forms a circular honeycomb skeleton, which supports each other and increases the pressure resistance. The addition of fly ash not only improves the workability of the concrete slurry, but most importantly, it enhances the strength of the cement in the late stage, thereby enhancing the strength after the product is cured, the flexural strength is increased by 80%, and the modulus of rupture is increased by more than 50%.

Performance Table

Performance Table

Item	size	2270*610/2240*610
	thickness	60mm	75mm	90mm	100mm	120mm	150mm
Surface density	kg/m2	≤70	≤70	≤90	≤110	≤110	≤110
Anti-impact Capacity	times	≥5	≥5	≥5	≥5	≥5	≥5
Anti-bending damage load/times over deadweight	times	≥3.5	≥3.5	≥3.5	≥5	≥5	≥5
Hanging Force	N	≥1000	≥1000	≥1000	≥1200	≥1300	≥1500
Compressive strength	Mpa	≥3.5	≥3.5	≥3.5	≥3.5	≥3.5	≥3.5
Moisture rate	%	≤10	≤10	≤10	≤8	≤8	≤8
Sound insulation	dB	≥35	≥35	≥40	≥42	≥45	≥50
Fireproof	H	≥1.5	≥1.5	≥2.5	≥3.0	≥3.0	≥4.5
The combustion properties of (AIorA2)	A1orA2

Application

Application

Length (mm)	Width (mm)	Thickness (mm)	Utilize
2270 2440	610	60	roof for villa, prefabricated house, makeshift house
75	roof for villa, prefabricated house, makeshift house
90	interior partition wall for house, office building, residential, school, hotel
100	interior partition wall for high rise building, mansion, hospital
120	exterior wall for warehouse, commercial building; floor with structure
150	exterior wall for college, shopping mall, row house,commercial place

Installation Instructions

Installation

Setting the line Mark construction lines and position the wall panels correctly.

Sawing the board Cut panels flexibly with hand saw or electric saw according to site size.

Sizing Treat the board tenon with cement and coat polymer mortar evenly.

Installation Move processed panels to the installation area for assembly.

Planting bars Drill holes on walls and pillars, fix panels with steel bars.

Correcting and fixing Use guiding rules to level, adjust and firmly fix all panels.

About Us

About Us

The energy-saving sandwich wall panels are our main product, which has many advantages compared with traditional wall panels, including lightweight, solid core, thin body, high strength, shock resistance, heat insulation, sound insulation, fireproofing, waterproofing and easy installation. This not only conforms to modern construction requirement but also meets the country environmental-friendly building policy.
We adhere to the "quality first, win-win cooperation" business philosophy. We can design the sandwich wall panels according to your special request. Welcome to visit our factory and become our clients some day!