Easy-Install Lightweight EPS Panels for Modern Home Building

Tấm EPS siêu nhẹ lắp dễ cho nhà hiện đại

Tấm sandwich EPS (ZJT-F) nhẹ, chống cháy, chống nước; hai mặt ván xi măng canxi silicat; lắp nhanh cho nhà ở hiện đại; CCC, ISO9001.

Product Parameters

Panel information of Sandwich Panel

Product	Sandwich Panel
Double Sides Surface Board	Calcium silicate board at 5.0mm thickness
Core	EPS , Patented additive, Portland cement, fly ash, sand
Asbestos free	100% non-asbestos
Specification: (Length*Width*Thickness)	2270/2440mm×610mm×60mm; 2270/2440mm×610mm×75mm; 2270/2440mm×610mm×90mm; 2270/2440mm×610mm×100mm; 2270/2440mm×610mm×120mm; 2270/2440mm×610mm×150mm;
Wall type	Composite wall panel
	Non-load bearing wall
	Solid panel
Packaging & Shipping	Packed with plastic film, protected by belt and place in pallet
MOQ	One 20' GP
Payment Term	T/T, L/C, etc
Lead Time	10-20 days after payment confirmed

Our Advantages

Panel Features of Sandwich Panel

1.Long life span
more than 70 years, it is used for construct permanent house, it is the best substitute for conventional concrete wall materials.
2.Earthquake resistance with Strong strength
Hanging fore for single point is more than 50kg, no need to worry about the safty .
3.lightweight, Easy and fast Installation
It only needs few hours to train a brick layer worker become a skilled worker for panel installation. And one worker can install 25sqm wall in one day. Besides, It requires only normal tools and accessories which you can get easily from your market.
4.Waterproof
Soundproof, fireproof, and heat resistance also.
5.low cost and can be re-used
disassembly and assembly are very convenient, it greatly improves the product efficiency and economic benefits, and also it will not result in too much construction waste and affect the normal operation activities.

Application

Application of Sandwich Panel

1). Interior partition (60mm,75mm or 90mm is your best choice)
2). Exterior Wall (120mm, 150mm, 180mm for your reference)
3). Floor and roof
4). Prefabricated houses
5). Modern high-rise Building
6). Schools, Hotels, office
7). Indoor space of ecological residences
8). All kinds of houses and structures

Installation Instructions

Installation Deatails

1. Grass-roots cleaning
Clean up the grassroots that needs to be constructed, and the mortar or concrete protruding from the wall must be cleaned with tools to facilitate the construction of the next sandwich wall panel.

2, Elastic line bin
Perform the elastic line operation on the ground and the appropriate position of the wall surface to ensure that the installed sandwich wall panel can be horizontal and vertical. Position and grade the edges of the partition wall and the edges of the doors and windows, and then select the plates with the same specifications according to the dividing lines.

3.Sizing preparation
Cut the sandwich wall panel as needed, pay attention to adjust the width and length of the sandwich wall panel to minimize unnecessary losses. Then mix cement and medium sand in a ratio of 1: 2, and then add building glue to prepare a paste. When sizing, first use the water to paint the uneven grooves of the partition board, and then apply the polymer mortar to the uneven grooves of the partition board and the baseline of the floor.

4.Install wall panels
Move the sandwich wall panel to the position where it needs to be installed, stand it up, and align it up and down with the baseline. Use a shovel to pry the partition board from the bottom of it, and then press the board firmly against the board. , Make the mortar overflow from the joint, and then temporarily fix it with a wooden wedge, check the flatness and verticality of the partition wall board. After the inspection is completed, the connecting part between the wall panel and the wall panel needs to be fixed with a special steel bar at an angle of 45 downwards.

5. Grouting construction
After the sandwich wall panel is installed and calibrated, it is filled with cement mortar with a mix ratio of 1: 2 and the building glue is blended. The upper and lower gaps of the wall board and the joints between the boards must be used as much as possible mortar to fill. In the process of grouting, if you want to bury a concealed pipeline or a switch box in the wall, you can use mortar to fill it after the installation is complete.

6, Finishing
If you want to install a door frame on a lightweight partition wall, you can use a splint to cover the door directly on the wall panel, fix it with iron nails, and then use a decorative panel for the cover. Finally, the surface of the partition wall is coated with paint. You can also choose to paste your favorite porcelain to achieve certain aesthetic requirements.

Company Profile

About us

Xiamen ZhongJingtai building materials Co., Ltd, a comprehensive enterprise, specializes in developing and producing the new energy-saving wall materials. Located in the beautiful city, Xiamen, ZJT has modern working environment and production base. The factory's annual production capacity is more than two million square meters.

The energy-saving sandwich wall panels are our main product, which has many advantages compared with traditional wall panels, including lightweight, solid core, thin body, high strength, shock resistance, heat insulation, sound insulation, fireproofing, waterproofing and easy installation. This not only conforms to modern construction requirement but also meets the country environmental-friendly building policy.

We adhere to the "quality first, win-win cooperation" business philosophy. We can design the sandwich wall panels according to your special request. Welcome to visit our factory and become our clients some day!