Dây chuyền sản xuất kính cách nhiệt tự động bơm khí argon bên trong

Automatic Insulating Glass Argon Gas Filling Inside Flat Press Production Line
This line can not only produce ordinary insulating glass but also for low-e insulating glass. It is a better mass production equipment to produce insulating glass with high automatic degree, high efficiency, easiness of operation and maintenance. It can be upgraded and expanded according to user's requirements.
Section 01: Input conveyor This section is mainly to transmit the glass into the washing and drying section. Carbon fiber conductive brushes are used for coating glass and Low-e glass detection. Section 02: Glass washing and drying section 1. Stainless steel material and corrosion-resistant material adopted for all washing area, water tank, and waterway system. 2. The 6 brushes are driven by 6 motors independently, which will not affect the other motors working when any of them has problems. 3. The connection mode of brush and motor is coupling, the brush motor and brush are directly connected, and there will be no slip or motor idling phenomenon. 4. The front 3 brushes are soft brushes with diameter 0.1 mm, which are suitable for Low-E glass washing, to prevent the film damage, the back 3 brushes are hard brushes with diameter 0.2 mm, which are suitable for washing ordinary glass. Section 03: Transition section Adopts dual motors to drive the transmission section. Two small glasses can be parked at the same time to improve work efficiency.
Section 04: Lights Inspection & Aluminum spacer placement 1. Be made of aluminum-alloy profiles, with beautiful appearance.
2.The back plate is equipped with a movable door (with lock), which is convenient for workers to enter and check the cleaning condition of the glass back side. 3. High quality LED lamps be adopted for light inspection, energy saving. 5)Section 05: Outside assembly ( optional ) The advantages of the outside assembly are fast and efficient, and the failure rate is low.

Section 06: Inside assembly & panel press with online argon gas inflation

1. Denser steel frame for a stronger machine body. 2. The panel press is controlled by Servo motor. 3. The front pressing plate steel frame is with two layers, the flatness can be adjusted. It ensures that the panel pressing achieve the best flatness after long-term use. 4. Each suction cup in the panel press equipped with one separate logic valve, and the suction cups work partitioned according to the size of the glass. 5. Automatic online gas filling: Suitable for double IGU & triple IGU; Argon inflation is from bottom side. Section 07: Output conveyor. This section is used to transmit and store the glass to improve the work efficiency. When connect with sealing robot, this section can store glass units.
Technical Parameters:Technical ParametersParam

Input power	44KW
Max. glass size	2500*3500mm
Min. glass size	500*300mm
Pane glass thickness	3-12mm
Max. Insulating glass thickness	12-80mm
Glass washing speed	3-12m/min
Working speed	2-48m/min
Air pressure	0.8m³/min
Water electrical conductivity	≤40µS/cm
Overall dimension	25000*2500*3400mm

We have many different sizes of models. Welcome to contact us for specific informations.


Technical Paramete
Technical Parameters