Conveniently Designed Partition Wall Panels for Modern Buildings

Tấm vách ngăn thiết kế tiện dụng cho nhà hiện đại

Tấm vách ngăn (ZJT-F) lõi EPS, hai mặt ván canxi silicat; nhẹ, chống cháy cấp 4; thi công nhanh cho công trình nhà hiện đại.

Product Parameters

Panel information of Sandwich Panel

Product	Sandwich Panel
Double Sides Surface Board	Calcium silicate board at 5.0mm thickness
Core	EPS , Patented additive, Portland cement, fly ash, sand
Asbestos free	100% non-asbestos
Specification: (Length*Width*Thickness)	2270/2440mm×610mm×60mm; 2270/2440mm×610mm×75mm; 2270/2440mm×610mm×90mm; 2270/2440mm×610mm×100mm; 2270/2440mm×610mm×120mm; 2270/2440mm×610mm×150mm;
Wall type	Composite wall panel
	Non-load bearing wall
	Solid panel
Packaging & Shipping	Packed with plastic film, protected by belt and place in pallet
MOQ	One 20' GP
Payment Term	T/T, L/C, etc
Lead Time	10-20 days after payment confirmed

Our Advantages

Panel Features of Sandwich Panel

1. Light weight
2. Energy saving
3. Eco-friendly and green materials
4. Waterproof
5. Fireproof
6. Heat resistant
7. Sound insulation
8. Shock resistance
9. Strong and durable
10. Fast installation
11. Termite, Pest and Rot resistant
12. Superior quality and finishes. Takes all decorative ways
13. Easily worked. No special tools required
14. Installation training available. For local unskilled labour and trade.

Application

Application of Sandwich Panel

1. Urban complexes
2. Hotel walls High-end office space
3. Municipal key projects Apartment
4. Hospitals
5. Schools
6. Mall shops partition
7. Professional fire protection projects
8. Reconstruction project
9. Underground space

Installation Instructions

Installation Deatails

1. Setting the line and carrying the board into position.
2. Using a hand-hold electric saw cut to the sizes needed.
3. Sizing cement on tenon side of two boards, then spread specific mortar on one tenon side casually.
4. Carrying the board prepared to be installed to the installation place, correcting the wall board by
special tools, and making it close tightly. Then let the specific mortar squeeze out into full and then fixing it
with a wedge temporarily.
5. Planting bars in wall and pillar: drill a hole in the original pillar or wall, and fix the board by steel bars
6. Correcting and fixing: Using a guiding rule to check the vertical and leveling correction.
7.Planting bars in structure beam: drill a hole in structure beam and plant a reversed 7-shaped steel bar to fix with wall board.
8. Planting bars in floor: drill a hole in the floor and plant a 7-shaped steel bar to fix with wall board.
9. Planting bars between two boards, plant a steel bar in the angle of 45 degree to fix.
10. Installing electrical wires and switches: setting lines on the places needing to be set with concealed
wire and switch box.
11. Grouting and filling starch: filling and sticking the corrected wall board with polymer mortar.
12. Sticking anti-cracking tape.
After the mortar and wall are all shaped, sticking glass-cloth or anti-cracking tape, brushing coating.

Company Profile

About us

Xiamen ZhongJingtai building materials Co., Ltd, is a professional high-tech research and development company producing new wall materials, machinery and equipment development, technology production and promotion of product applications. The company is situated in the charming Xiamen city, with the convenience of water and land transportation and only ten minutes from the airport. We respond positively to the national policy on wall reforming. We have developed successfully wall panels that meet the energy saving needs of modern architecture. We can produce more than 2 million square meters of various wall materials annually.