Daisan B2B

Báo giá, chat nhanh hơn trên app

Mở app
Bỏ qua tới nội dung

6 ảnh

Bộ lặp toàn băng kỹ thuật số điều chỉnh băng thông WCDMA Lte 850MHz

Mã: 831148175Thương hiệu: boostel0 lượt xem / 30 ngày

1.300.000 đ/bộ

Từ 1 bộ

Chọn quy cách & số lượng

Xuất xứ

%

Nhập tỷ lệ dự phòng nếu cần mua thêm; để 0% khi chỉ đặt đúng số lượng đã chọn.

Tạm tính1.300.000 đ
Hỏi qua Zalo Daisan

Còn cân nhắc? Đặt thử mẫu trước —

Giao dịch bảo đảm khi đặt mua qua Daisan.

Xuất xứ:
Trung Quốc
Chống sét:
cột chống sét
Thương hiệu:
boostel

Thông tin cơ bản

Xuất xứTrung QuốcThương hiệuboostel
Tiêu chuẩnTiêu chuẩnMã sản phẩm831148175
Đóng góihộp gỗChống sétcột chống sét
Chứng nhậnISO: Tổ chức Tiêu chuẩn Hóa Quốc tế, CEĐiều kiệnMới
Gói Vận Chuyểnhộp gỗNăng Lực Sản Xuất2000 bộ/năm
Thông Số Kỹ Thuật428*328*175mm

Mô tả sản phẩm

Specifications of 850MHz Bandwidth Adjustable Digital Repeater
Model:BT-LS37E4-850
The Digital Repeater is designed to provide a more cost-effective solution than adding a new Base Transceiver Station (BTS) to improve signal coverage and communication quality in single system. And its easy installation and maintenance can help carrier get fast return.
The repeater is working as a relay between the BTS and mobiles. It receives the low-power signal from BTS via the Donor Antenna, linearly amplifies the signal and then retransmits it via the Coverage Antenna to the weak/blind coverage area. And the mobile signal is also amplified and retransmitted to the BTS via the opposite direction.

Features



  • Aluminum-alloy casing with IP65 protection has high resistance to dust, water and corroding
  • Software defined filter supporting up to 2 sub-bands adjustable in each individual frequency band
  • Low interference to BTS by adopting linear amplifier with high gain and low noise
  • Adopting filter with highly selectivity and low insertion loss eliminates interference between uplink and downlink

Applications

To expand signal coverage or fill signal blind area where signal is weak or unavailable.
Outdoor: Airports, tourism regions, golf courses, tunnels, factories, mining districts, villages, …
Indoor: Hotels, exhibition centers, basements, shopping malls, offices, parking lots, …

Applications

Bộ lặp toàn băng kỹ thuật số điều chỉnh băng thông WCDMA Lte 850MHz



Application Diagram


Bộ lặp toàn băng kỹ thuật số điều chỉnh băng thông WCDMA Lte 850MHz

Technical Specifications

Items Specifications
System GSM/UMTS/LTE
Working Frequency
(Customized)
Uplink 824~849MHz
Downlink 869~894MHz
Bandwidth 4 sub-bands, each 0.2~10MHz Tune Bandwidth
Maximum Gain 85±3dB
Maximum Output Power Uplink 30dBm
Downlink 37dBm
ALC Support
Gain Adjustment Range 0-31dB in step of 1dB
Voltage Standing Wave Ratio ≤ 1.5
Maximum Input power(Non-destructive) 0dBm
Error Vector Magnitude(EVM) ≤ 8%
Peak Code Doman Error(PEDE) ≤ -35dB
Spurious Emission 9KHz~1GHz ≤ -30dBm
1GHz~12.75GHz ≤ -36dBm
Third-order Inter-modulation Comply with 3GPP TS 25.106 V6.0.0
Noise Figure ≤ 8dB
System Delay ≤ 8.0μSec
I/O Impedance 50Ω
RF Connector N-Type (Female)
Temperature Range Operation: -25°C ~ + 55°C
Relative Humidity Range ≤ 95% (non condensing)
Power Supply (customized) AC220V,50/60Hz
Dimensions 428*328*175mm
Weight ≤15kg
NMS Monitoring Function(Optional) Real-time alarm for door status, temperature, power supply, VSWR, etc;
Remote control such as turn on/off, increasing/decreasing output power, etc;
Real-time status for output/input power, UL/DL gain, all status of repeater etc.

Installation & Commissioning

1.1 Installation

1.1.1 Steps for mounting on the Pole

  1. At Donor site, install the FSR Donor Unit, Donor Antenna, Link Antenna, and RF cable as per specified plan and site layout. FSR Donor Unit can be pole-mounted using the brackets as shown below.
  2. Place M8 screws through the holes of H type brackets as shown in figure 1
  3. Fix combiner onto the H type brackets with M6 screws
  4. Fix H type brackets with combiner installed onto the pole with U type brackets and M8 screws
Bộ lặp toàn băng kỹ thuật số điều chỉnh băng thông WCDMA Lte 850MHz


Figure 1 Repeater Mounting Bracket
  1. Orient the Link Antenna of Donor Site to the direction of the Remote Site.
  2. Use Site Master to measure the VSWR of the RF cable from the Link Antenna. The value should be less than 1.5; Otherwise, check the connectors and the installation of the cable.
  3. Start Commissioning the Donor Unit .
  4. Proceed to the Remote Site.
  5. At Remote site, install the FSR Remote Unit, Link Antenna, Coverage Antenna, and RF cables. Remote Unit can be wall mounted or pole mounted depending on the approved plan.
  6. Orient the Remote Link Antenna to the direction of the Donor Site.
  7. Using Spectrum Analyzer, check the Link RSL; adjust the Link Antennas of both Donor and Remote until the required RSL is achieved. Link RSL can be computed using conventional path calculation method.
  8. Then, measure the VSWR of the RF cables connecting with the Link Antenna of Remote Unit. The value should be less than 1.5, otherwise, check the connectors and the installation of the cable.
  9. Start Commissioning the Remote Unit .

1.1.2 Steps for mounting on the wall

  1. At Donor site, install the FSR Donor Unit, Donor Antenna, Link Antenna, and RF cable as per specified plan and site layout. FSR Donor Unit can be wall-mounted using the brackets as shown below.
  2. Make four marks on the wall according to the dimension shown as figure 2
  3. Drill four holes at position marked
  4. Fix two pcs H type brackets on the wall with M8 expansion screws
  5. Fix combiner onto the brackets with M6 screws

Bộ lặp toàn băng kỹ thuật số điều chỉnh băng thông WCDMA Lte 850MHz

Figure 2 Repeater Mounting Bracket 6. The following steps are the same with step 4 to 12 for mounting on the Pole.

1.2 Commissioning

  1. Connect the RF cable from Donor Antenna to the spectrum analyzer and check if the Donor Antenna is receiving the correct frequency; and then measure the signal level of the said frequency (RSL). Adjust the antenna to make the readings approach the recorded value on the survey report. Record all readings.
  2. Inside the repeater, disconnect the uplink duplexer to the ICS module so as to cut any signal coming from air going to the uplink duplexer and thus protecting the amplifier from damaging. Connect a 30 dB attenuator to the output of the repeater; this attenuator will serve as a load for the repeater. The purpose of this attenuator is to protect the equipments from damaging.
  3. Turn ON the repeater. Observe the LED display on the NMS board. Check for any alarm. Under normal condition, the POWER LED should be always green and the RUN LED should be blinking, the ALARM LED should be not bright with red color.
Bộ lặp toàn băng kỹ thuật số điều chỉnh băng thông WCDMA Lte 850MHz

Figure3 Interface of NMS Board
Connect your laptop to the repeater via the data cable.
Bộ lặp toàn băng kỹ thuật số điều chỉnh băng thông WCDMA Lte 850MHz

Thông tin công ty

S

Shenzhen Boostel Technologies Co., Ltd.

Loại hình
Nhà sản xuất/Nhà máy & Công ty thương mại
Năm thành lập
2014
Quy mô nhân sự
31
Khu vực
Thâm Quyến, Quảng Đông · 🇨🇳 Trung Quốc
Xem gian hàng

Câu hỏi thường gặp

Số lượng đặt tối thiểu là bao nhiêu?

Shenzhen Boostel Technologies Co., Ltd. khai số lượng tối thiểu 1 bộ. Cần ít hơn thì ghi rõ trong yêu cầu báo giá để nhà cung cấp xem xét.

Giá đã bao gồm thuế và phí giao hàng chưa?

Giá hiển thị là giá tham khảo nhà cung cấp khai trên sàn. Thuế, phí giao và giá theo số lượng được chốt trong báo giá — hãy gửi yêu cầu kèm số lượng và nơi giao để nhận giá cuối cùng.

Bao lâu thì có hàng?

Shenzhen Boostel Technologies Co., Ltd. chưa khai thời gian giao. Ghi hạn bạn cần nhận hàng trong yêu cầu báo giá.

Xuất xứ và quy cách đóng gói thế nào?

Xuất xứ: Trung Quốc. Đóng gói: hộp gỗ.

Có đặt được hàng mẫu không?

Ghi «cần hàng mẫu» cùng số lượng mẫu trong yêu cầu báo giá hoặc nhắn trực tiếp cho nhà cung cấp. Phí mẫu và phí gửi do nhà cung cấp báo.

Có tài liệu kỹ thuật hay chứng chỉ không?

Nhà cung cấp chưa tải tài liệu cho sản phẩm này. Bạn có thể xin catalog, chứng chỉ hoặc bản vẽ khi gửi yêu cầu.

Nhà cung cấp này đã được Daisan xác minh chưa?

Gian hàng đã được Daisan xác minh hồ sơ doanh nghiệp. Xem chi tiết ở trang gian hàng.

Gửi yêu cầu báo giá

Vui lòng nêu số lượng, địa điểm giao và thời gian cần hàng.

Có thể đính kèm tệp ở bước tiếp theo