Bảng gỗ chống ăn mòn cho lối đi ngoài trời, giá đỡ nho trong sân, sàn lều bằng gỗ Phần Lan

SgaierTruss Dome tent floor introduction




1.Introduction
The outdoor wooden floor of the dome tent is made of anti-corrosion wood imported from Finland. The main material is Filand pine (Pinus silvestris)

Single piece size 19*100*3000mm

Keel size 30*50mm




Finland cold with long winter ,the tree just have 100 days to grow in a year, and slow and balanced growth produces the best wood. The wood is hard and compact, with uniform and straight textures, small but few tree knots. Low resin, with excellent structural properties, with an air density of 0.54g/cm3 (wood weight about 540 kg/m3), which is higher in strength than most softwood .

Finland wood belongs to outdoor anti-corrosion wood that has been artificially preserved, treated with ACQ preservative under pressure and KDAT (secondary kiln drying). After vacuum degreasing, Finland preservative wood is infused with water-soluble preservative ACQ in a closed high-pressure chamber to immerse the preservative into the deep cells of the wood, thereby providing the wood with functions of antifungal, anti-corrosion, anti-termite, and other parasites, with high density, high strength, good nail grip, clear texture, and decorative effects.

ACQ does not contain heavy metal chromium and highly toxic arsenic, with minimal impact on humans, livestock, and the environment, while also possessing good anti-corrosion properties. Therefore, anticorrosive wood products treated with ACQ preservatives are a safe and environmentally friendly product.

species	Pinus silvestris
Latin name	Pinus svlvestris L. Scots
Air dry density (kg/m3)	540
Along the grain compressive strength (kgf/cm2)	500
Chordal compressive strength of transverse grain	70
lang=EN-US>(kgf/cm2)	950
Anti-EN-US>(kgf/cm2)	910
Flexural modulus of elasticity (1000kgf/cm2)	109
Shear strength along the grain of the string surface (1000kgf/cm2)	68
feature	Anti-corrosion, moisture-proof, insect-proof

Scope of application: outdoor floor, tent floor,flower stand, balcony, wall panel construction


product installation
impact drill beauty nail self-tapping screw electric screw driver

Step 1: Install the keel
Lay the keel with a spacing of 30-40 cm(adjust as required) and drill a small hole in the keel with a suitable drill machine
Step 2: fix the keel
fixed the ground with the solid nail, if you want to increase the height of the ground and the floor, you can lay two keels
Step 3: fix the floor
Use a drilling machine to drill holes on the floor, leaving 1-2 mm gap between the wood floor and the ground, so as not to cause physical changes of thermal expansion and contraction
Step 4: Fixed floor and brush wood oil
Screw the preservative wood and keel.
Last brush wood oil for more durability (Note: please clean wood shavings,Wood oil needs to be brushed 2-3 times)



Pictrues in our company