Anodized Aluminum Interlocking Stone Cladding Bracket Set

Bộ giá đỡ ốp đá liên kết bằng nhôm anod hóa

Thông số: Mã sản phẩm: B007-01; Phong cách: công nghiệp; Cấu trúc: giá đỡ móc treo dưới; Nghệ thuật sản xuất: Kim loại; Đã điều chỉnh: Với đã điều chỉnh; Gấp lại: Mở máy ra; Tùy chỉnh: Tùy chỉnh; Màu sắc: Kim loại; Kích thước: tùy chỉnh; kích thước: 50*30*70mm. Bộ khung gắn mạ đá khóa liên động bằng nhôm anốt hóa Bộ khung gắn bằng đá khóa liên động có hình điểm nối là một đầu nối hợp kim nhôm hai phần dành cho cố định mặt đá cơ học. Cả hai thành phần đều có cùng hình học và khớp với nhau khi đảo ngược, tạo kết nối khóa liên động giữa các thành phần bên đá và bên đỡ. Thành phần bên đá kết nối qua một neo được cắt dưới nền, trong khi thành phần bên hỗ trợ có thể được bắt bu-lông vào một giá đỡ hình chữ L tương thích. Các chiều dài và cấu hình giá đỡ L khác nhau mang đến sự linh hoạt khi đặt ở độ lệch của mặt tiền và bố trí kết nối cụ thể theo dự án. Bộ sản phẩm có bề mặt mạ phay và hỗ trợ tùy chỉnh bản vẽ của khách hàng, bao gồm kích thước, hồ sơ, cấu hình lỗ, đánh dấu và bao bì. Kết nối khóa liên động để đảm bảo an toàn khi tham gia Các tiết dạng động tiếp xúc với nhau để tạo thành kết nối cơ khí giữa các thành phần bên đá và bên đỡ. Hai thành phần giống nhau Cả hai nửa đều sử dụng cùng hình học thành phần. Đảo ngược một bộ phận cho phép cặp gắn kết, đơn giản hóa công việc nhận dạng và khớp bộ phận. Định vị linh hoạt với giá đỡ chữ L Có thể kết hợp với giá đỡ hình chữ L tương thích với các chiều dài và cấu hình khác nhau, cung cấp phạm vi để thích ứng với các vị trí lắp đặt và

Anodized Aluminum Interlocking Stone Cladding Bracket Set The Liken Interlocking Stone Cladding Bracket Set is a two-piece aluminum alloy connector for mechanical stone facade fixing. Both components have the same geometry and fit together when one is reversed, creating an interlocking connection between the stone-side and supporting-side components.
The stone-side component connects through an undercut anchor, while the supporting-side component can be bolted to a compatible L-shaped bracket. Different L-bracket lengths and configurations provide flexibility when accommodating project-specific facade offsets and connection layouts.
The set has an anodized finish and supports customization to customer drawings, including dimensions, profiles, hole configurations, marking and packaging. Interlocking Connection for Secure Engagement
The mating profiles engage with each other to form a mechanical connection between the stone-side and supporting-side components. Two Identical Components
Both halves use the same component geometry. Reversing one component allows the pair to engage, simplifying component identification and matching. Flexible Positioning with L-Brackets
Can be combined with compatible L-shaped brackets of different lengths and configurations, providing scope to accommodate varying installation positions and facade offsets. Bolted L-Bracket Connection
Connects to the selected L-bracket using screws or bolts. Connection dimensions and hole positions can be matched to the required assembly. Anodized Aluminum Alloy
Made from aluminum alloy with an anodized surface finish for stone cladding connection applications. OEM and Drawing-Based Customization
Custom dimensions, cross-sectional profiles, hole sizes and positions, product marking, private labeling and packaging are supported.  
- Natural stone facade cladding
- Dry-hanging stone installation
- Ventilated rainscreen facades
- Stone curtain wall systems
- Marble and granite panel installation
- Concealed mechanical panel fixing
- Stone-to-subframe connection assemblies
- Commercial building facades
- Hotel and office-building exterior walls
- Public-building facade projects
- Interior stone wall systems, subject to system design
- Facade renovation and panel-replacement projects Compatibility with ceramic, porcelain, engineered stone, honeycomb panels or other facade materials must be confirmed according to the selected product dimensions and complete fixing-system design.
  · Stone cladding contractors
· Facade contractors
· Curtain wall companies
· Facade system suppliers
· Stone processing factories
· Building materials distributors
· Facade fixing distributors
· Project procurement companies
· OEM and private-label buyers Liken supports OEM production and customization based on customer drawings or agreed sample specifications. Available options include: - Component dimensions and section thickness
- Cross-sectional profile geometry
- Hole sizes, positions and machining requirements
- Matching L-bracket requirements
- Product marking and private labeling
- Packaging and carton labels
Please provide your drawing, required quantity and connection requirements for quotation. Tooling, minimum order quantity and lead time depend on the agreed customization scope. 1. What is this interlocking bracket set used for?
It connects stone panels to facade subframes in mechanical stone cladding assemblies. The stone-side component connects through an undercut anchor, and the supporting-side component connects to a compatible L-shaped bracket. 2. Are the two components different?
No. Both components have the same geometry. One is reversed so that the two profiles engage with each other. 3. What provides the installation adjustment?
Positioning flexibility comes from the selected L-bracket length and connection configuration. The available adjustment depends on the complete assembly. 4. Can it be combined with different L-shaped brackets?
Yes. Different L-bracket lengths and configurations can be used through a bolted connection, provided the hole positions, dimensions and connection requirements are compatible. 5. What is included in the standard set?
The standard set includes two identical interlocking components only. L-brackets, undercut anchors, adjustment or locking screws, bolts, nuts, washers and other accessories must be purchased separately. 6. What material and surface finish are used?
The components are made from aluminum alloy with an anodized surface finish. 7. How does the connection engage?
The two matching profiles interlock when assembled in opposite orientations. Final retention and fastening requirements should follow the specified assembly detail. 8. Do you support OEM and custom profiles?
Yes. Dimensions, cross-sectional profiles, hole configurations, marking and packaging can be customized to agreed drawings and requirements. 9. Can you add our brand or supply private-label packaging?
Yes. Product marking, private labeling and customized packaging are supported. Please provide your artwork and packing requirements with the inquiry. 10.Do you provide samples?
Yes. We provide two samples free of charge. Shipping costs are paid by the customer. Company ProfileZhejiang Liken Technology Co., Ltd. is an international business platform for facade processing and mechanical fixing systems. Registered in Hangzhou, Zhejiang, China, with a factory located in Wenzhou, Liken serves overseas stone processing companies, facade contractors, distributors, machinery importers, and project buyers.
 
Liken is built on the 17 years of industry experience of Shanghai East Rail Industry Co. Ltd. in facade processing, mechanical fixing products, manufacturing, and project applications. Managed by the experienced East Rail team, Liken focuses on international customer communication, product documentation, product matching, order coordination, and after-sales contact.
 
Our product range includes facade back-bolt drilling equipment, diamond drilling tools, back-bolt anchors, undercut anchors, aluminum brackets, stainless steel connectors, cast-in channels, and related facade fixing components. Instead of supplying isolated products only, we help customers match suitable equipment, tools, anchors, and fixing components according to panel material, thickness, hole requirements, output needs, installation method, and local market conditions.
 
Our facade back-bolt drilling equipment has been developed to its 8th generation, covering portable, semi-automatic, automatic, double-head, and four-head models. Customized configurations can also be discussed according to project and production requirements. The equipment is designed for back-bolt dry-hanging stone facade systems and supports stable, accurate, and efficient stone panel hole preparation.
In addition to equipment, Liken also supplies anchors and fixing components for stone facade installation. Back-bolt anchors are key components in dry-hanging stone facade systems, connecting stone panels with the supporting substructure. Some related products have been tested by authorized testing institutions.
 
Liken's overseas customer service has reached markets including Africa, North America, the UAE, Europe, and the United Kingdom. Our support begins with understanding the customer's real application, not simply recommending a standard product.
 
Liken's goal is simple:
make every hole more precise, and every connection more reliable.