10-50ton/H Máy trộn xi măng cát Dây chuyền sản xuất vữa dán gạch trộn sẵn

Product Description

The automatic dry powder mortar dryer machine equipment production line is mainly composed of raw material storage system software, improving transportation system software, metering and batching system, mixing system software, finished product discharging system software, packaging system software, dust removal equipment, automatic control system, Steel frame structure service platform, automatic palletizer, etc.

A dry mortar mix plant is mainly used to produce the ordinary premixed dry mortar and the insulation mortar, capacity from 1t/h to a max of 100t/h or more

our technicians will offer you the special design and drawing from A to Z with on-site installation and commissioning; it is popular in building construction and road construction, and is seen everywhere around us; it is used by adding water on site; the production formula is different, up to the quantity of the additive;

Our Advantages

1. The mixing speed is faster, with automatic feeding and pneumatic feeding, and there is no accumulation or dead angle on the barrel wall.
2. The total area is small, the structure is reasonable, the actual operation is simple, the production efficiency is high, the dust is generated, and the driving force configuration is effective.
3. High-efficiency configuration, the dry mortar production line with an annual output of 20,000 to 30,000 tons can use 4-6 raw material tanks under normal conditions, in which 2 large tanks are used to store commercial concrete and coal ash, other Small tanks are used to store light calcium, heavy calcium carbonate, sand, ingredients, etc.
4. The commercial coal ash does not need to improve the machinery and equipment and is driven by the concrete pump truck. Appropriate material dispatch system software applies a bucket elevator to dispatch work, thereby preventing resource consumption.
5. The software of the metering system guides the raw materials in the silo into the measuring silo under the mutual cooperation of the metering screw, and completes the metering of the raw materials according to the feedback of the data and information of the sensor. The measured materials are introduced into the main bucket elevator according to the screw conveyor and raised to the mixing bin at the upper end of the mixer.
6. The to-be-mixed warehouse is a pneumatic large-opening type, which can quickly put the to-be-mixed material into the weightless mixer to complete the continuous production of dry powder mortar.

We have three types of lines: simple type, semi-automatic and economical type, and full-automatic and high-efficiency type.

We can design the most reasonable dry mortar production line with factory price according to your Budget investment, Capacity, Area condition, Formula, Different end products, etc. These dry mortar plants can add configurable with a crushing machine, screen machine, and drying machine, in the area of lack of dried sand. 1. Tower-type dry mortar production line is applied to mass production, for ordinary and special dry mortar. It can produce a variety of kinds of products and have high efficiency, which has a capacity that can reach 200T/H. Lower operating cost, large productivity, big investment, compact structure, and covering fewer floor areas with magnificent structure.
2. Ladder-type dry mortar production line is also applied to mass production, for both ordinary and special dry mortar. More variety, high efficiency, large productivity, big great investment, covering more floor area.
3. is applied to medium-scale production, less changeless of products, which capacity can reach to 100T/H. It is suitable for simple and flexible dry-mortar production. Less investment and covering more floor area.
4. Workshop-type dry mortar production line is applied to the special dry mortar with a small-scale investment with the characteristic of low investment, less floor area, small capacity, and few varieties. It is a simple and flexible product line that can be installed in standard industrial workshops.

Packaging & Shipping

FAQ

1. Q: The output of the dry mortar mixer?
A:10-15T/H, 20-30T/H, >30T/H
2. Q: What is it used for?
A: Mixing sand, cement, lime, plaster, etc. Production dry mortar; used for external wall putty mortar complete production line.
3. Q: What is the delivery time?
A: 1> in stock: within 15 days; 2> customize:15-20 working days.
4. Q: Quality guarantee term?
A: 18 months warranty, but not including man-made, wearing parts, and operation mistakes. if any problem during 18 months, we will provide spare parts for free, but buyers should pay the freight.
If you have any inquiries, pls feel free to contact us!

You should figure out the productivity of the dry mortar equipment you need,
then you can choose the structure of the equipment according to the size of your factory area.
After that, you can consider whether you want a fully automatic type or a semi-automatic type.
Finally, you can choose whether to buy a sand dryer or packing system according to your real needs.
You can make clear the basic things above and ask our professional sales for advice.
Our engineers can provide you with the site plan, and 3D drawing to meet your demand.
Both standard types and customized dry mortar mix plant is available in our company.