Thông số sản phẩm
Monophase Input:
Threephase Input
Topology:
6 Pulse Thyristor controlled AC/DC Rectifier with input isolation transformer
Optional 12 Pulse Thyristor controlled AC/DC Rectifier with input isolation transformer
Nominal Voltage:
110 VAC / 115VAC /208 VAC / 220 VAC / 230 VAC / 240 VAC ±15%
Nominal Frequency:
50 / 60 Hz ±
Transformer:
Galvanically isolated
Input Protection:
Thermic-Magnetic Over Current Protection, Over Voltage Protection, Phase Sequence Free Operation (3 Phase), Soft Start
Floating Output Voltage:
12/24 VDC±1% / 48 VDC±1% / 110 VDC±1% / 220 VDC ±1%
Output Voltage Adjustment:
12/24VDC output: 10VDC to 30VDC, 48VDC output: 48VDC to 60VDC, 110VDC output: 110VDC to 160VDC, 220V
Output Current Adjustment:
0-100% of Nominal Output Current
Boost Charge Voltage:
100% to 120% of Floating Output Voltage
Boost voltage (V/C):
2,4 lead acid battery 1,60 NiCd Battery
Float voltage (V/C):
2,23 lead acid battery 1,40 NiCd battery
Nominal Output Current:
Available upto 1200 Amp (12 Pulse over 400 Amp)
Maximum Output Current:
100% of nominal output current
Output Ripple:
1% RMS AC of Output Voltage
Dynamic Response (w/out battery group):
±5% of Output Voltage (25% load change at 50% load)
Dynamic Response (with battery group):
±2% of Output Voltage (100% load change)
Battery Charging Principle:
Constant Current/ Constant Voltage
Output Protection:
Short Circuit Protection, Over Voltage Protection, Reverse Voltage Protection Short Circuit, Overv
Battery Protection:
L-C filters, Overcurrent Electronic protection,Over Voltage Protection and Thermic Fuse
Cooling:
Forced fans with smart fan controlling system
Isolation Voltage:
2500VAC input/chassis and output/chassis
Efficiency at full load:
>90% >92%
MTBF:
100,000 Hrs. (w/out battery group)
Operating Temperature:
-10 / + 40 ºC
Protection Level:
IP20 (Standard)
Enclosure Material:
Mild Steel, Zinc-phosphate coated
Operating Temperature:
-10 / +40 °
Relative Humidity:
5 - 90 %
Operating Altitude:
Max. 2000 Mt.
Electrical Standards:
EN 50091-1 (Security) / EN 50091-2 (EMC)
PARALLELING:
Optional Communication
RS 232 / RS 485 - Timer Setting, Boost Voltage Setting, Float Voltage Setting ,Output current settin:
Paralleling